SZ-ZB9 is a perfect design for straight-line edging and arising, it is available with various size and thickness. The machine is equipped with 9 spindles, where 5 spindles for the edging and 4 arrissing; glass thickness is adjusted by a motor with digital display. A special design on the in-feed section, for which is able to control the desired value of feeding integrally, so that unnecessary to adjust each spindle individually. The independent felt wheel and the cerium water recirculation system make the flat edge more shining; Input and output conveyor adopt timing belt which can improve the transmission precision.

SZ-ZB11 Glass Straight-line Edging Machine is suitable for processing straight-line edge & 45° arris on glass. Rough, fine grinding and polishing on glass flat edge and arrises can be finished at one time. Input and output conveyors adopt timing belt which improves the stability of transmission. Spindles totally: 5 for the straight-line edge, 3 for front arris and 3 for back arris. Digital display for both thickness and speed.

• 11 spindles, grinding, rough polish, fine polishing as long as the arrising with polishing could be finished by one pass

•  Thickness is able to be adjusted on touch screen by electrocity power

• Control system: Siemens PLC with Touch Screen.

• Grinding amount is able to be adjusted intergrally

• Felt wheel with cerium for polishing on both botton edge and arris.
• Stainless steel water tank; stainless steel polishing tank with eletricial agitator.
• Lubricating pump supplies lubricating oil to all the parts which need to be lubricated.
• Electronics comply with CE regulation